Proper Steps in Brake Inspection and Repairs

Your car’s brake is undeniably the most important feature when your safety is concern and you don’t want it on the road if your brakes are only half done after a brake repair. To properly complete a brake job, a detailed check-up should be done first to determine which parts are worn or damaged whether it needs a repair or a replacement. Brake service mainly includes replacement of rotors and pads but there are several more parts however which are integral to the brake system and your safety.  

Brake Inspection and Repairs

When you need a brake repair brooksville, it is important that you look for mechanics which are ASE certified. Automotive Service Excellence or (ASE) is a certification group that provides assessment and certifies professionals and shops in the automobile repair and service industry in the United States and some parts of Canada.  

Check this guide in the inspection of brakes. 

  • Inspection of the brakes should include a test drive of the vehicle to check the signs of the problems of the brakes including grinding, squealing noises, shaking, low brake pedal and less stopping power.  
  • Checking the thickness of the disk brake pads and looking for signs of cracks, uneven wear or separation from plates 
  • Inspect wheel cylinders and calipers for leaks and cracks. 
  • Inspect the master cylinder worn or damaged linings and for leaks. 
  • Check hoses and lines for leaks, corrosion, and other occurrences that indicates the probable presence of damage. 
  • Check the condition land level of brake fluid. 
  • Ensure that shoes are the proper thickness and are not lose or cracked on vehicles which are equipped with rear drum brakes. 
  • Drum hardware should be inspected noting any corroded, discolored, or loose components. 
  • Ensure correct function of brake warning lights and ABS. 
  •  Check for proper emergency brake operation.   

After a thorough inspection of the system, an expert mechanic can now make the right suggestion of which parts should be repaired or replaced, parts which are in good condition and which part may need attention later on. Components wear out in different rates, you will have to replace only what’s necessary or you can replace all parts whether it is moderately or extremely worn out.    

This decision should be made personally taking into consideration the condition of each par as well as the budget and time constraints. Parts may be replaced only as required or you can repair the entire system.    

It is important to consider the quality of parts used when you are deciding which repair shop you will trust your vehicle. You may go to the cheapest and save money but generally, this does not involve appropriate checkup and that uses low-quality parts that does not provide warranty or you can choose to go to a high-quality service with high-quality parts. The difference in low-quality and high-quality parts can be the difference between needing to replace brake pads once a year or only need in every three years or more and of course there is a great difference in the ability to stop in an emergency. 

Submit a Comment

Your email address will not be published. Required fields are marked *